How often to change the tank oil:
1. Under normal circumstances, the automatic transmission oil (ATF) of cars needs to be replaced every two years or every 40000 km. However, it depends on the model. Different models have different demands. As far as Japanese models are concerned, it is advocated to replace them once every 40000-60000 km. For vehicles with more high-speed traffic, it is suggested to replace the cloth once every 40000 km.
2. The automatic transmission oil can not be completely discharged clean by using atmospheric pressure, so it can only discharge 1 / 2 of the waste oil. The remaining oil will gather with sludge and impurities in the valve body, torque converter and cooling pipeline, forming a blockage in the internal oil circuit of the system. More than 99% of the failures of automatic transformer boxes are caused by overheating and impurities in ATF oil which has not been replaced for a long time. Also check whether the transmission bottom shell is deformed or whether the transmission pipeline is leaking oil.
Danger of not replacing
1. The gearbox oil will transmute and transpiration when it works at high speed and high temperature for a long time, then aggravate the wear of mechanical parts, and damage the internal parts of the gearbox when it is severe.
2. If you don't replace the transmission oil for a long time, the cold car will show the appearance of weak starting
3. In the process of moving inside the vehicle, there is a slight appearance of slipping.
4. If the transmission oil is not replaced for a long time, the transmission oil will become thicker, which will easily block the radiator of the transmission, and then the oil temperature of the transmission will be too high, which will aggravate the wear.
Article from:http://www.chnfppg.com.cn
07-10
Why can transmission change speed and what kind of transmission?
Why can the transmission change speed?Why can the gearbox adjust the output torque and speed of the machine? It's the principle of gears and levers. There are many different gears in the gearbox. Through the combination of gears of different sizes, the adjustment of torque and speed can
07-10
Causes of transmission shifting
Causes of transmission shift skipping defect:l) Due to the excessive wear of the gear teeth of the variable speed gear, gear sleeve or synchronizer cone, a rudiment is formed along the direction of the tooth length, and an axial thrust is generated when the gear is meshed, which is also affe
07-10
Three types of transmission
There are three common types of automatic transmission: at, CVT, AMT and DSG. At that time, at was widely used, and at almost became the pronoun of automatic transmission.At is composed of hydraulic torque converter, planetary gear and hydraulic operation system, which ends the variable spee
07-09
Causes of transmission gear wear
Transmission gear often works under the condition of high speed, high load and constant alternating speed and load. In addition to the normal wear and tear of gears, there are also reasons such as poor quality of lubricating oil, poor lubrication conditions, improper driving operation, improper